Metron Group
Folder - Calibration Certificates
Metron Group
Folder - Calibration Certificates
:
Folder - Calibration Certificates
:
:
Links
:
:
:
:
Folder containing calibration certificates
:
(
)
05.PR013 Control of Monitoring & Measuring Devices
1.2 Verification of calibration certificate
All calibration certificates should be supplied with the goods purchased, leased or hired.
Check calibration certificate supplied with instrumentation includes the following (if applicable)
1. Unambiguous identification of the item calibrated (normally a model and serial number).
2. Evidence that the measurements are traceable to a National calibration authority.
3. The method of calibration.
4. A statement of compliance with any relevant specification
5. The calibration results.
6. The uncertainty of the measurement.
7. The environmental conditions while under test
8. The date of calibration.
9. The signature of the person under whose authority the certificate was issued.
10. The name and address of the issuing organisation including the date of issue of the certificate.
11. A unique identification of the calibration certificate
Project Planner and Controller and Team Lead